|
3DQuick
Overview
|
|
3DQuickMold
3DQuickMold® is a
professional plastic mold design solution. It is developed by an
engineering team with 15 years in CAD programming and 17 years in
plastic mold design industry. To solve very complicated plastic mold
design problem is the prime objective of developing 3DQuickMold®.
3DQuickMold® follows the industrial practices and use the
same workflow in mold shops. The ease of use and powerful mold design
capabilities have been verified by the early users of 3DQuickMold®.With
the introduction of 3DQuickMold® in the market for less
than two years, 3DQuickMold® is leading in market
acceptance and growth rate in the local market.
Key Functions
Mold Splitting
Flexible Workflow
High Performance
Key Functions
3DQuickMold® makes itself stand
out from the competition in the mold splitting functions and the ways
it guide mold engineers to complete the design task. Same as
SolidWorks® in CAD, it is the best tool for experience mold
designers or young engineers who start the plastic mold design career.
With its fast and convenient mold design features, it turns the
routine plastic mold design job into a working pleasure. The optimized
workflow in 3DQuickMold® enables young engineers to
accelerate their learning curve in plastic mold design. Within a few
days of training, engineers can work independently in 3DQuickMold®
environment to finish their work. In line with the benefits of
SolidWorks®, easy to use, easy to learn, and full of
features are the characteristics of 3DQuickMold®.
3DQuickMold® provides
end-users
with the following functions:
Product Assembly
Layout Manager
Mold Base Manager
Ejector Manager
Cooling Manager
Undercut Manager
Libraries Manager
Sub-insert Manager
Electrode Manager
Feed Manager
Mold
Splitting
Mold design engineers spend a
big ratio of the design time in Splitting Mold. 3DQuickMold®
combines the experience of mold makers and the powerful modeling
functions of SolidWorks® and results a very fast and direct
mold split feature in the system.
Flexible Workflow
3DQuickMold® allows
mold designers to choose multiple workflows. User may choose top-down
or bottom-up approach. Top-down approach allows user to do core and
cavity layout, selection of mold structures, before the mold split
operation. It aids the generation of bill of materials and facilitate
the early purchase planning in the whole design cycle as the result of
3D parametric design. Bottom-up approach will guide user to complete
the mold split operation before going to the processes of core and
cavity layout, and selection of mold structure. This approach is
suitable to very complex mold design. Professional plastic mold design
solution should provide automation, and at the same time allows users
to adjust and fine tune to handle new mold design. 3DQuickMold®
provides this flexibility in different stages during the mold design
cycle.
High Performance
3DQuickMold® is capable
to handle very complicated and complex mold structures with all the
details of mold splits, ejectors, cooling channels, and electrodes
without scarifying the performance expectation of plastic mold
designers. 3DQuickMold® customized the SolidWorks®
environment to achieve this optimized result. Field reports showed
that the speed of 3DQuickMold® in handling complex mold
design is equally good or even better than the most popular plastic
mold design solution in the high-end CAD markets.
|
